Setting up a dedicated NxCloud VM

AWS EC2

  1. Login to your AWS Console and select the top image published here
  2. Launch a new instance from that AMI
  3. Recommended instance type: t3.2xlarge
  4. You will need to SSH into the instance once it's created:
  5. Networking:
    • Allow the instance to receive HTTP and HTTPS traffic
    • Allow SSH from your current IP
  6. Leave the storage options as they are
  7. "Launch instance"
  8. Wait 10 minutes, then navigate to your instance's IP in the browser. You should see the NxCloud dashboard!

NxCloud landing page

Your NxCloud URL

  1. At this point, your instance will have a public IP accessible from the browser.
    • You can consider this IP the URL of NxCloud, and proceed with the below steps and all will work fine!
  2. You might want, however, to add a Load Balancer in front of the instance, with an explicit domain (e.g. https://my-nxcloud.my-org.com).
    • This is strongly recommended because you will be able to upgrade/restart/re-configure your NxCloud EC2 instance while keeping the NxCloud URL static.
    • Create an application load balancer
    • You will need to create a certificate for your domain to assign to the LB
    • And you will need to target your EC2 instance from the LB
    • You should now have a permanent domain pointing to your NxCloud instance

Once you have your NxCloud URL proceed to the below steps!

Configuring your NxCloud instance

  1. Create a new myconfiguration.yaml file with the below contents
# This is all you need to get the baseline of your nx-cloud instance configured! # Set the external URL your instance is running on. This is the URL from the previous step nxCloudAppURL: 'https://nx-cloud.on.my-domain.ca' secret: # set your initial admin password for logging into the app adminPassword: 'correcthorsebatterystaple'
  1. Apply the configuration:
scp -r ./myconfiguration.yaml nx-cloud@<your-instance-ip>:~/config/user/update.yaml

That's it! After a few minutes, you should be able to log-in with:

  • username: admin
  • password: <the-password-you-set-above>

Applying the license

Once you log-in, you will see an organisation has been created for you.

  1. You can rename it or create a new organization.
  2. Navigate to your new organization's page and send us it's id
    • It should look something like this: https://your-url.com/orgs/649f240f7fb955000c1fd10b/workspaces
  3. We will then give you a License Key which you can apply on your org's billing page

Connecting to your NxCloud instance

In your Nx workspace, you can enable NxCloud by running:

NX_CLOUD_API="https://nx-cloud.on.my-domain.ca" npx nx connect

If it doesn't work, there might be an issue with unrecognized certificates on your instance. You can try running with:

NODE_TLS_REJECT_UNAUTHORIZED=0 NX_CLOUD_API="https://nx-cloud.on.my-domain.ca" npx nx connect

Although we have a full guide here for dealing with self-signed certificates.

Advanced configuration and auth

You can optionally enable authentication using your preferred SSO provider:

  • GitHub
  • Bitbucket
  • GitLab
  • SAML (Okta, Azure AD etc.)
# This is all you need to get the baseline of your nx-cloud instance configured! # only use this if you'd like to use any of the newer NxCloud version from here: https://nx.dev/nx-cloud/reference/release-notes#docker-containers # global.imageTag: '' # Set the external URL your instance is running on nxCloudAppURL: 'https://nx-cloud.on.my-domain.ca' # Uncomment (along with github secrets below) to enable working with GitHub pull requests or github auth #github: # auth: # enabled: false # pr: # apiUrl: '' # this is only needed if you have a self-hosted github instance #gitlab: # apiUrl: '' # this is only needed if you have a self-hosted gitlab instance # auth: # enabled: false # we do not support self-hosted bitbucket instances #bitbucket: # auth: # enabled: false #saml: # auth: # enabled: false # Provide plaintext values for your application to use. We will extract them, # store them within the application runtime, and scrub the plaintext ones from # the filesystem secret: # set your initial admin password for logging into the app # see here: https://nx.dev/nx-cloud/private-cloud/auth-single-admin adminPassword: 'correcthorsebatterystaple' # If you want to enable GitHub Login, just provide your client id & secret, we handle the rest # see here: https://nx.dev/nx-cloud/private-cloud/auth-github githubAuthClientId: 'my_client_id' githubAuthClientSecret: 'my_client_secret' # The same goes for GitLab authentication # see here: https://nx.dev/nx-cloud/private-cloud/auth-gitlab # gitlabAppId: 'my_gitlab_app_id' # gitlabAppSecret: 'my_gitlab_app_secret' # Bitbucket too! If these are uncommented, BB auth is automatically enabled # see here: https://nx.dev/nx-cloud/private-cloud/auth-bitbucket # bitbucketAppId: 'bitbucket_app_id' # bitbucketAppSecret: 'bitbucket_app_secret' # SAML auth # see here: https://nx.dev/nx-cloud/private-cloud/auth-saml # samlEntryPoint: 'your_saml_entry_point' # samlCert: 'saml_cert'

Upgrades

We send out emails with every new NxCloud release to all our Enterprise customers:

  1. You can view your current version at the /version route: https://your-nx-cloud-url.com/version
  2. And these are the latest NxCloud releases

To upgrade to a newer version, add the below line to your myconfiguration.yml file:

global.imageTag: '2306.01.2' # set the version of nx-cloud you'd like

And apply the changes:

scp -r ./myconfiguration.yaml nx-cloud@<your-instance-ip>:~/config/user/update.yaml